SF50i Impact — Non-Insulated Aluminum Folding Sliding Doors
The non insulated aluminum folding door SF 50 offers optimum stability, burglar resistance as well as high operating tightness. The SF 50 is suitable for different applications such as balcony glazings or patio doors.
All aluminum folding sliding door systems are designed for application with a low thermal performance profile.
Most common applications are:
To be used as hurricane impact protection
Low Insulation Exterior Applications
Interior Space Management Applications
Commercial Room Divider
School Classroom Divider
Hospitality Space Divider
Bar / Counter Enclosures
etc.
-
To be used as hurricane impact protection
Low Insulation Exterior Applications
Interior Space Management Applications
Commercial Room Divider
School Classroom Divider
Hospitality Space Divider
Bar / Counter Enclosures
etc.
-
The inner and outer rubber gaskets close tightly against the tracks and leave the noises and the weather outside. Additional safety and operational features generate peace of mind.
-
Our standard painting procedures are powder coating and anodization.
Both procedures allow a large variety of colors or effects to be achieved.
Anodized finishes can get pre-treatments like polishing or brushing the extrusions to achieve the perfect look.
Powder coatings can be flat, glossy, smooth, textured and pre-treated for marine environments.
Wood grain effects are also available for the aluminum extrusions.
FULL Standard RAL or NCS color ranges are available, beside of custom mixtures and color to match a sample provided. -
DP +/- 60 psf rated and tested in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05 Impact and Cycling tested in accordance with ASTM E1886, E1996 and TAS 201 & 203
(Test Specimen Size: 226 1/2” w x 96” h Overall)Air infiltration ASTM E283-04
Test Results for inswing unit:
Test Pressure +1.57 psf = 0.000 (ft3/min-ft2)
Test Pressure +6.24 psf = 0.025 (ft3/min-ft2)
Test Results for out-swing unit:
Test Pressure +1.57 psf = 0.00 (ft3/min-ft2)
Test Pressure +6.24 psf = 0.06 (ft3/min-ft2)Uniform static air pressure ASTM E330-02
Uniform static test, forced entry test TAS 202
Water infiltration ASTM E331 = 12 psf/ 15 psf result (inswing/outswing)
Water infiltration ASTM E547 (5-1-5-1-5)= 9 psf result (inswing only)
Florida product approval #17774.1
Forced Entry ASTM F588, AAMA 1302.5 & 1303.5
Burglar-proof PA 202 to resistance class 2 (WK2)
Thermal performance available up to:
U-Factor = 0.28
SHGC = 0.18
VT = 0.37 -
Basic Size Limitations:
System Panel Width:
Max. 36" (900 mm) (within the state of Florida)
Max. 43" (1100 mm) (outside the state of Florida)
System Height:
Max. 8´ (2400 mm) (within the state of Florida)
Max. 10´ (3000 mm) (outside the state of Florida)
Panel Weight:
176 lbs/panel (80 kg/panel)Note: Those informations are basic limitations. All oversized units on request only.
Available Options:
The options list is almost endless, since we can upgrade our products to almost all customer needs.
Just to name a few options:
- Egress door hardware
- Locksets as needed
- Door closers
- Custom handle solutions
- Thousands of Glass types available
- Different Track Types (raised sill, recessed flush sill,...)
- midrails, muntins,...
- matching fixed, tilt, turn or tilt and turn windows/doors
